To prolong the service life of the vibratory separator, it is necessary to protect the vibratory separator. Therefore, this article will focus on how to protect the vibration separator from three aspects. All equipment must be in a horizontal position. After the equipment has been transported for a long time, all fastening screws must be checked and tightened to ensure that the motor current is correct and single-phase operation. The motor rotates in the direction shown by the arrow on the body. 2. Trial operation of the vibrating separator: First, pour a small number of raw materials to be sieved or filtered into the center of the screen, and process them according to the flow direction, angle, speed, and volume of the materials. Raw material processing. With a special rubber ring and bouncing ball; Adjust the angle of the lower counterweight; increase the weight of the excessive weight 3. The method of setting the excessive weight of the vibrating separator: According to the different characteristics of different raw materials, to achieve the best screening effect, there are stages of overweight and underweight. The trajectory of raw materials extends or shortens the time for raw materials to move on the screen. Adjust the counterweight part, only the bottom counterweight, the top counterweight generally does not need to be changed. If the angle between the overweight and the underweight can be adjusted between 0° and 15°, the angle between the underweight and the overweight should be adjusted. It is set to 15° according to the rotation direction of the motor. Fourth, the method of changing the screen of the vibrating separator: first loosen the locking screw of the packing ring, remove the screen frame, and take out the damaged screen; put the fabric on the solid grid, squeeze the snap ring, and tighten the fastening screws symmetrically. Tighten the fabric to make the entire surface of the fabric smooth and stretch evenly; install the ball disc (note: the relative position of the ball disc and the locking ring is fixed); Insert the rubber ball into the center of the rubber plug screen, and finally connect the rubber plug to complete the installation of the net. Above we introduced the vibratory separator . The HENAN EXCELLENT MACHINERY CO., LTD is a professional bulk material conveying equipment manufacturer. We have a professional production capacity and rich production experience as well as strict product quality inspection. We can guarantee that every piece of equipment we produced is qualified equipment, and we ensure the qualified rate of the products. To know more about our products, Please visit our official website: https://m.exctmach.com/.